Gallery: Fascinating Photos Take You Behind the Scenes of Hubble
© Michael Soluri/Infinite Worlds01Hooker 100 inch telescope at Mount Palomar
In 1929, Edwin Hubble used the telescope at the Mount Wilson Observatory outside of Los Angeles to prove that the universe is expanding. The space telescope bearing his name launched into Earth orbit aboard the shuttle *Discovery* 51 years later on April 24th, 1990.
© Michael Soluri/Infinite Worlds02May 2009: Release of the Hubble for the last time from the cargo
Between 1993 and 2009, crews have rocketed up to service and upgrade the Hubble five times. This image was made just after the crew of the *Atlantis* released it into its orbit some 360 miles above water-world Earth in 2009.
© Michael Soluri/Infinite Worlds03Andrew Feustel (PhD)
To work in the vacuum of space, astronauts need to practice in spacesuits in water. Here, Andrew Feustel is training in the largest deep-water pool in the world at the Neutral Buoyancy Laboratory at NASA’s Johnson Space Flight Center in Houston.
© Michael Soluri/Infinite Worlds04K.Megan McArthur ©M-Soluri-InfWrld
K. Megan McArthur was a rookie on the fifth and final mission to service Hubble in 2009. As both the robotic arm operator and the ascent and entry flight engineer, she is arguably the last human to have “touched” the scope when she released it from the cargo bay of the *Atlantis*.
Michael Soluri05STS 125 Mission Specialist Megan McArthur and Michael Massimino
Seated behind Commander Scott Altman and Pilot Greg Johnson, McArthur along with Michael Massimino practice a landing in the shuttle orbiter simulator at NASA’s Johnson Spaceflight Center.
© Michael Soluri/Infinite Worlds06Security guard shuttle launch pad 39A - Kennedy Space Center
The launching of rockets into space takes place in a high security, industrial scale at the Kennedy Space Center. Here, a security guard sits at the entrance to the shuttle launch pad a few weeks before the May 2009 launch.
© Michael Soluri/Infinite Worlds07Sodium lit ceiling of the clean room at Kennedy Space Center
The instruments and tools destined for the Hubble are prepared here in the dust-free high bay of the Payload Hazardous Servicing Facility. NASA’s probes to Mercury, Mars, Jupiter, Saturn, and Pluto have also been readied for their journey under these high-pressure sodium lights.
© Michael Soluri/Infinite Worlds08Goddard Hubble SM4 technician prepares the STiS FCP for space f
A technician prepares to stow the Space Telescope Imaging Spectrograph Fastener Capture Plate. The STiS FCP was used by Mike Massimino to remove 111 fasteners and washers into 111 self-contained boxes so they wouldn’t float off into the telescope.
© Michael Soluri/Infinite Worlds09restricted last review session in PHSF -Kennedy Space Center
April 2009: the astronaut crew and senior Hubble engineers during a restricted last review and familiarization session in the high bay of the Payload Hazardous Servicing Facility at Kennedy Space Center. A few days later the hardware is transported to the cargo bay of *Atlantis*.
© Michael Soluri/Infinite Worlds10Hubble Crew Fam - HSPF High Bay Kennedy Space Center: 5 weeks be
Here, four "space-walking" astronauts and their mission trainers review one of the tool boxes they will be accessing in the cargo bay of the *Atlantis* in just a few weeks.
© Michael Soluri/Infinite Worlds11Still Life: Mini Power Drill System
The tools the astronauts use look like one-of-a-kind sculptures. Soluri photographed them on black & white film on a light table in the high-security high bay at the Goddard Spaceflight Center in Maryland. This is the Mini Power Drill, specifically designed for spacewalks at the Hubble.
Michael Soluri12Still Life: ACS Indexing Card Extractor Tool
This Advance Camera for Survey Indexing Card Extractor was designed so that John Grunsfeld, wearing pressurized gloves, could remove four failed circuit boards from the Advance Camera for Surveys electrical system, the second most important high-resolution camera system aboard the Hubble.
© Michael Soluri/Infinite Worlds13Still Life: Recovered Handrail from Hubble's Space Telescope Ima
Handrails are ubiquitous on spacecraft like the ISS and the Hubble. This handrail was recovered from the Hubble, and due to one stripped bolt, astronaut Mike Massimino had to forcibly pull it off in order to place the Space Telescope Imaging Spectrograph Fastener Capture Plate over an access panel to the failed instrument.
Michael Soluri14Jim Delie - engine compartment shuttle Atlantis - 30 days before
"Crawling around inside the engine compartment of the *Atlantis* was like being inside of a fine jeweled watch," says Soluri. Here, James Delie, a space shuttle rocket technician, crouches by the main fuel line to the shuttle’s three engines before the May 2009 launch.
